Enhanced Smart Management Features
The 3C-DU-1000 or 3C-WDM-1000 series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. and The DIP also can support 9K jumbo frame.
Easy Installation
The 3C-DU-1000 or 3C-WDM-1000 series support 3C-MC-R14 2U Chassis. this media converter with media converter ear can plug into 3C-LINK 14 slots media converter chassis.
Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802)
1000BASE-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S)
1000BASE-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15
1000BASE-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60
1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
Layer 2 key Features
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets
- Supports auto MDI/MDI-X function
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX
Fiber media allows
- Multi-mode fiber using SC/LC/WDM connector
- Single-mode fiber using SC/LC/WDM connector
Compact size for working with 3C-LINK MC family media chassis (3C-MC-R14)
Wall-mountable design
LED indicators for easy network diagnostics
Provides DIP switch for LFP function (Disable/Enable) setting
OAM TS-1000 supported
9K Jumbo Frame Supported
Choice of fiber-connector from SC, LC and WDM, multi-mode/single-mode fiber for 1000Base SFP interface
Compact in size, easy installation
Converter Specifications |
Speed |
Twisted-pair:
10/20Mbps for half/full-duplex
100/200Mbps for half/full duplex
2000Mbps for full-duplex
Fiber-optic:
2000Mbps for full-duplex
200Mbps for full-duplex (GT-805A only) |
Network Cables |
Twisted-pair
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100m
1000BASE-T: 4-pair STP Cat 5 up to 100m
Fiber-optic Cable
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
1000BASE-LX:
9/125μm single-mode cable, providing long distance for 10/15/20/30/40/50/60/70/120km (vary on SFP module)
100BASE-FX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km(vary on SFP module)
9/125μm single-mode cable, providing long distance for 20/40/60m (vary on SFP module) |
Jumbo Packet Size |
9K
|