OM5
OM5-2

OM5 Multimode Wideband Patch Cord

OM5 wideband multimode bend insensitive fiber optimized for multi-wavelengths transmission systems operating in the range of 850-950nm, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s and 100 Gb/s and reduced fiber counts for higher speeds. OM5 meets TIA-492AAAE and draft IEC 60793-2-10 A1a.4 requirements while completely backward compatible with existing OM4 networks and applications. It meets RoHS compliant and the fiber patch cord is optically tested for insertion loss to ensure high quality.

Duplex Fiber Patch Cord LC-LC Multi-mode OM5

fiber optic patch cables in OM5 quality for high-performance fiber optic cabling in high-density environments

fiber optic patch cables in OM5 quality for high-performance fiber optic cabling in high-density environments.

  • Security for the future! The OM5 fiber connector quality with very low insertion ensures an excellent quality at very high bandwidths of up to 100 Gbit/s Ethernet, Fibre Channel, and OIF applications with up to 150 meters - extends the system cost benefits to ultra long building backbones and medium length campus backbones.
  • Duplex cables with fiber type Multimode 50/125µm, OM5
  • Attenuation 850nm ≤ 2.3 dB/km, 953nm ≤ 1.7 dB/km, 1300nm ≤ 0.6 dB/km
  • The cable assembled with "low-loss" connectors achieve very good values for insertion loss and reflection. Insertion loss of less than 0.3dB
  • Outer diameter: 2.0mm
  • UPC polish
  • Modal Bandwidth: 4700 MHz-km (this bandwidth is based on application-specific implementation of the EMBC requirements)




 

Zirconia Ceramic Ferrule

The precision ferrules can reach up to 500 times insertion lifespan.

20/10D Min. Bend Radius

The OM5 fiber allows tighter cable bends for slack storage and routing.

100-160N Tensile Strength

The pull-resistant cable prevents cable breaking and prolongs the service life.

Specification

  Fiber Type OM5 50/125μm Fiber Count Duplex (2-fiber)
  Connector Type LC to LC Polish UPC to UPC
  Cable Length  1m,2m,3m … 50m or Customize Cable Diameter 2.0 mm
  Tensile Strength 70 N Length Tolerance +/- 1cm
  Insertion Loss ≤0.3dB Return Loss ≥40dB
  Repeatability ≤0.3dB Interchangeability ≤0.3dB
  Jacket Material PVC (OFNR riser-rated) Jacket Color Grenn
40G Ethernet Distance 440m at 850nm 100G Ethernet Distance 150m at 850nm
  Environment Operating: -20°C to 70°C
Storage: -40°C to 85°C		 Compliance Telcordia GR-326-CORE
RoHS compliant
  Application Optical fiber communications system
Optical fiber access networks
Optical fiber CATV
Optical fiber test equipment
Optical fiber data communication		  Application Premises Distribution
Local Area Networks (LAN)
Fiber-to-the-Home (FTTX)
Device Terminations


Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.

Company

Products

Solutions

News

Contact

Follow Us

Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持

Privacy Policy