4CH 2.5G OEO TRANSPONDER CARD

The 3C-LINK C/DWDM solution offers a high capacity, high performance platform that is open, scalable and highly programmable 3C-ONC-OTDS card is a 4-channel 2.5G service access card,which is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 42Mbit/s~2.67Gbit/s to be accessed, and then convert them to optical signals of a standard DWDM wavelength or standard CWDM wavelengt

100M to 2.5G OEO Card

3C-ONC-OTDS card is a 4-channel 2.5G service access card,which is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 42Mbit/s~2.67Gbit/s to be accessed

3C-ONC-OTDS is a 4-channel 2.5G service access card launched by 3C-LINK ;its main function is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 42Mbit/s~2.67Gbit/s to be accessed, and then convert them to optical signals of a standard DWDM wavelength or standard CWDM wavelength, so that the multiplexing unit can conduct WDM for optical signals of different wavelengths and also achieve the inverse process of the above process. It’s applicable to the low-cost wavelength division transmission solution for any access of services with the rate of 2.5G or below.


Product Model 3C-ONC-OTDS
Basic function *  Support bidirectional transmission of 4-channel services with any rate of 42Mbit/s~2.67Gbit/s
*  Support unidirectional transmission of 8-channel services with any rate of 42Mbit/s~2.67Gbit/s
Access service type ● FE, GE, STM-1/4/16/
● FC 1G/2G, FICON, FICON Express, ESCON
● CPRI:614.4Mbit/s, 1.23/2.46Gbit/s
Occupied slot number Occupy 1 slot, applicable to the platform of the whole OTNS 8600 series
WDM technology Support DWDM: C Band, 100GHz or 50GHz
Support CWDM:1271nm~1611nm
Network management function ●Support real time monitoring for port working state, including: transmitting optical power, receiving optical power, temperature, etc
●Support the self adaptation of the working rate
interface It supports 8 pluggable optical port SFP, and the electrical interface SFP can be configured when the electrical interface service is accessed
Typical power consumption 15 W
MTBF > 100000 hours

Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.