3C-OTMT4

400G CONHERENT DWDM CFP2 TO QSFP28 CARD

The 3C-LINK DWDM solution offers a high capacity, high performance platform that is open, scalable and highly programmable. The open architecture enables integration with existing line systems as alien wavelengths to enable cost effective bandwidth expansion. 400G QSFP28 to CFP2 Card service signal OEO is regenerate the connected 1 roads service optical signal. Amplification and signal cleaning and shaping can also realize DWDM CFP2 and multi-mode conversion of service optical signals. 3C-LINK 100G OEO card can be used as a transponder or as a repeater and regenerator. It provides a range of options for repeating optical data signals, converting them to other optical or electrical formats, or combining multiple fibers onto a single fiber. With transparent bi-directional forwarding capability between the 2 fiber media, the 400G 4* QSFP28 to CFP2 Card transponder brings you the best and simplest solution for Metro, Regional and Long Haul optical networks. The max support 2000km 400G* 40CH DWDM system.

400G CONHERENT DWDM CFP2 TO QSFP28 CARD

4x100G ↔ The 400G electric layer multiplexes/demultiplexes and converts it into a 400G rate WDM standard wavelength optical signa

The 3C-ONTS8600 series with 400G CFP2 to 4* QSFP28 Card (OTMT4 card)  supports applications such as short haul and metro at 400G per wavelength, or ultra-long haul 100G solution. The product meets market demands for low power consumption, rack space savings and reduction in the overall solution DWDM by increasing the capacity of enterprise and metro networks.
The solution provides full demarcation point between the service and the uplink DWDM side and is interoperable with any 3rd party switch or router. This provides full visibility and performance monitoring of both line optical transport layer (OTN) and service interfaces 100G LAN/OTU4.

400G OTN Muxponder Functional Structure

 

400G OTN Muxponder Product Specification

Function Description
Interface
  • Client side interface: 4 ports, hot-pluggable based on QSFP28

  • Line side interface: 1 port, hot-pluggable based on CFP2 DCO

Line side multiplexing structure
  • 200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4

  • 400G: OCh <-> OTUC4 <-> ODUC4 <-> ODU4

Client side signal mapping mode 100GE <-> ODU4
Support service type
  • 100GE

  • OTU4

WDM technology
  • Support C Band 400G DP-16QAM@75GHz 64CH tunable (191.3625 THz ~196.0875THz)

  • Support C Band 200G DP-16QAM@50GHz 96CH tunable (191.30 THz ~196.10THz)

FEC technology
  • 200G: SD-FEC

  • 400G: SD-FEC

Occupied slot number Support OTNS8600 series chassis, occupy 2 slots
Network management
  • Support performance monitoring and alarm monitoring

  • Support port loopback, port shutdown and ALS functions

Power consumption 60W maximum (including the optical transceiver)

Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.