The new generation Managed Industrial Gigabit Switch is with 12-Port 10/100/1000Base-TX and 12-Port 100/1000Base-FX SFP that provide stable and reliable Ethernet transmission offered by 3c-link, with high quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain
Industrial-grade Ethernet Switches can offer redundant mechanisms for critical applications that need always-on connections.
Industrial-grade Ethernet Switches can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 75°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.
Supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments.There is no theoretical limit on the number of rings that can be added to a network. So as long as you have sufficient bandwidth, you can keep adding nodes.
For efficient management, the Managed Industrial Switches is equipped with console, Web and SNMP management interfaces.
The managed Ethernet functions include STP/RSTP/MSTP/ITU-T G.8032 ERPS and multiple μ-Ring for redundant cabling, layer 2 Ethernet IGMP, VLAN, QoS, ACL, Security, IPv6, bandwidth control, port mirroring, cable diagnostic and Green Ethernet.
Advanced PoE management functions optional, such as weekly PoE power scheduling as well as device auto-checking and auto-reset. The built-in “PoE schedule” for energy saving, enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
With IP40 Aluminum case for better heat dissipation and industrial grade temperature -40°~75°, dust proof and DIN Rail mountable on plant floors or in curb side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages (9 to 56V DC, or 48 to 56V DC for PoE) for worldwide high availability applications requiring dual or backup power inputs.
High Heat Dissipation Structure, thermally conductive pad connected to PoE and main chipset, and the both side chipset is closely fit to the aluminum case, and the casing is striping style to get the most dissipation performance, so the whole design is very precise and delicate.
Physical Port |
||
| RJ45 Port and Speed | 12×10/100/1000Base-Tx | |
| Fiber Port and Speed | 12×100/1000Base-Fx SFP | |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) | |
| Parameters | ||
| Ethernet Standards | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service |
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP ITU G.8032 ERPS Ring RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 |
| Packet Buffer | 16Mbits | |
| Packet Length | 10Kbytes | |
| MAC Address Table | 16K | |
| Transmission Mode | Store and Forward (full/half duplex mode) | |
| Switch Fabric | 64Gbps/non-blocking | |
| Exchange Property | Delay time: < 7ps Backplane bandwidth: 24Gbps; Packet forwarding rate: 17.86Mpps |
|
| PoE (Optional) | ||
| PoE Standard | 8×IEEE 802.3af/IEEE 802.3at PoE | |
| Power Budget | Max. PoE output power budget 30W | |
| LED Indicator | ||
| Power | Connect-always | |
| SYS | Industrial Ethernet Switch System work state | |
| RJ45 | Link/Act: connect-always; data exchange-twinkle | |
| Fiber | Link/Act: connect-always; data exchange-twinkle | |
| Power Information | ||
| Power Access Mode | Phoenix terminal | |
| Redundant Power Input | DC 12-56V | |
| Overload Protection | Yes | |
| Power Reverse | Support | |
| Power Consumption | Full-load<12W | |
| Physical Property | ||
| Protection Grade | IP40 aluminum case | |
| Cooling Mode | Natural cooling, no fan design | |
| Dimensions | 440mm×250mm×44.5mm( 485mm×250mm×44.5mm with ear) | |
| Installation Mode | DIN Rail/wall-mountable | |
| Weight | 4000g | |
| Working Environment | ||
| Operating Temperature | -40°C~75°C | |
| Operating Humidity | 5%~90% non-condensing | |
| Storage Temperature | -40°C~85°C | |
| Warranty | ||
| MTBF | 500,000 hours | |
| Defects Liability Period | 3 year warranty, lifetime technical support | |
| Certification Standard | ||
| EMC | FCC Part15 Class A
CE-EMC/LVD RoHS EN61000-4-2 (ESD), EN61000-4-3 (RS) EN6100044 (EFT), EN6100045 (Surge) EN61000^1-6 (CS), EN61000-4-8 EN61000-4-11 |
|
| Vibration | IEC60068-2-6
-40~75°C High and Low Temperature Test IP40 Protection Test |
|
| Software Features | Redundant network:
STP, RSTP, MSTP, IT-T G.8032 Ethernet Ring Protection Switching (ERPS)for redundant cabling ERPS/ Ring for Redundant Cabling, recovery time<20ms in 250 devices Multicast: IGMP snooping V1/V2/V3 VLAN: IEEE 802.1Q4K VLAN, GVRP, GMRP, QINQ Link Aggregation: Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation Management Function: CLI, Web based management, SNMP v1/v2c/v3, Telnet/SSH server for management Diagnostic Maintenance: Port mirroring, Ping Alarm management: 1 way relay alarm output, RMON, SNMP Trap RMON, MIBII, Port mirroring, Event syslog, DNS, SNTP, IEEE 802.1ab LLDP Security: DHCP Server/Client/Relay option 82/Snooping User hierarchical management Flexibility security: Port based and MAC based IEEE 802.1X, ACL, HTTP/HTTPS, SSL/SSH v2 Data control Port-based ingress/egress speed limit, Full duplex IEEE 802.3x, half duplex back-pressure flow control. Broadcast storm suppression, Un known-Multicast suppression and Unknown-Unicast suppression Software upgrade via HTTP, redundant firmware to avoid upgrade failure |
|
3CF-SFP+-SRP
3CPG-434S1OM-LX
3CW-QSFP28-23-LR& 3CW-QSFP28-32-LR
3C-56GB-CU1M
3CI-SFP0204G
3C-OTNS8600V OTN System
3C-ONTS8600I-OLS
3C-HDMI-M4K60-T10
3C-ONU-X100W
3C-XM100DG
3C-AD-SCU
Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持
Privacy Policy
