
CCWDM Module
Mini type RJ SFF (Small Form Factor) is intended for 10km reach service from 155Mbps to 1.25Gbps high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. The transceiver consists of three sections: a 1310nm FP transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA). The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.
Mini type RJ SFF (Small Form Factor) is welded small package optical transceiver usually with 1×10 pinout, with the general speed of less than 1250Mbps and using LC interface. Mini Small Form Factor (SFF) Transceiver Multi-source Agreement (MSA) was established by defines the package outline, circuit board layout, and pin function definition.
3C-LINK MODEL | 3CF-413L1SM-LX | Vendor Name | 3C-LINK |
Form Type | RJ Mini SFF | Max Data Rate | 1000Mbps |
Wavelength | 1310nm | Max Cable Distance | 20km |
Interface | LC duplex | Optical Components | FP 1310nm |
Cable Type | SMF | DOM Support | Yes |
TX Power | -9.5 ~ -3dBm | Receiver Sensitivity | < -23dBm |
Commercial Temperature Range | 0 to 70°C (32 to 158°F) | Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
3CF-SFP+-SRP
3CPG-434S1OM-LX
3CW-QSFP28-23-LR& 3CW-QSFP28-32-LR
3C-56GB-CU1M
3CI-SFP0204G
3C-OTNS8600V OTN System
3C-ONTS8600I-OLS
3C-HDMI-M4K60-T10
3C-ONU-X100W
3C-XM100DG
3C-AD-SCU
Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持
Privacy Policy