DCI8

2U OTN /DCI Muxponder System

3C-LINK 3C-OTNS8600-DCI8 This is a stackable ultra-200G/400G DWDM transmission platform for data center interconnection applications. The product has large transmission capacity, compact size, low power consumption and fully meets the requirements of data center application. It is suitable for both short-distance interconnection and long-distance transmission. In client side, it supports 100G and 10G; in line side, it supports 100/200/400G interface. Based on the open software architecture, it provides various open interfaces.

200G/400G DCI/Muxponder Platform

3C-OTNS8600-DCI8 ultra-100G DWDM transmission platform for data center interconnection applications. The product has large transmission capacity, compact size, low power consumption and fully meets the requirements of data center application.

3C-OTNS8600-DCI8 is a stackable ultra-100G/200G/400G  DWDM transmission platform for data center interconnection applications. The product has large transmission capacity, compact size, low power consumption and fully meets the requirements of data center application. It is suitable for both short-distance interconnection and long-distance transmission.

In client side, it supports 100G and 10G; in line side, it supports 100/200/400G interface. Based on the open software architecture, it provides various open interfaces.
3C-OTNS8600-DCI8 the max support 8 slots card. 

The 3C-OTNS8600-DCI8 supports applications such as long haul 100/200/400G solution. The product offers lower power consumption, saving rack space for Data Center. It supports Data Center operators to bring down overall Capital expenditures and Operating expenses by increasing the density of ports.


The solution is customized as demarcation point between Data Center operator and infra supplier. This device provides vivid performance monitoring of both line interface and service interfaces with full compatibility with any 3rd party IT facility.

 

Flexible Design

The 3C-OTNS8600-DCI8 is a modular and cost-effective solution for rolling out 100GbE services or capacity expansion in existing network. The device has 400G pluggable unit. It delivers up to 1.6T in a 1U chassis with pluggable optical modules. All design follows pay-as-you-grow principle. 3C-LINK’s designed 3C-OTNS8600-DCI8 to deliver carrier grade high-end solutions at any mix for high-end carrier, enterprise and DCI networks for serving up to 16 x 100Gb Ethernet or OTU4.

Powerful Feature Set


The platform is designed for high 100G port density and high level of energy efficiency. The product comprises up to 8 Units of 400G each, with one 400G or dual 200G CFP2 digital coherent optics (DCO) uplinks on the line side, and 4 x QSFP28 on the client side.


Physical Characteristics


Characteristics

 Characteristics

Shelf Type and Dimensions(mm) (W*D*H)

 490mm*440mm*88mm

Power Supply

AC: Input 100～240V, 47～63Hz

DC:Input -40V～-72V

Power Consumption

130W with coherent CFP2

110W with grey CFP2

Client Interface

 100G QSFP28

System Interface

 CFP2 200G Slots or CFP2 400G Slots

Environment

Working temperature：0°C～45°C

Storage temperature：-40°C～70°C

Relative humidity: 10%～90%, no condensing

 

Technical Specifications

1. Electrical Unit - 3C-DCI-OTMF
 

Technical Feature

3C-DCI-OTMF Description

Size

Single slot service card, four slots per chassis

Client-side interface

Each 3C-DCI-OTMF service card supports four pluggable QSFP28 based 100G client ports, in total sixteen 100G client ports per chassis.

Line-side interface

Each 3C-DCI-OTMF service card supports one pluggable 400G/200G CFP2 DCO coherent modules, in total four 400G/200G line-side ports.

Line-side signal and multiplexing structure

200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4
400G: OCh <-> OTUC4 <->ODUC4 <-> ODU4

Client-side signal and mapping method

100GE <-> ODU4

Line-side modulation format

200G:16QAM
400G:16QAM

FEC mode

200G: SD-FEC
400G: SD-FEC

 

2. Electrical Unit - 3C-DCI-OTME

Technical Feature

3C-DCI-OTME Description

Size

Single slot service card, four slots per chassis

Client-side interface

Each 3C-DCI-OTME service card supports four pluggable QSFP28 based 100G client ports, in total sixteen 100G client ports per chassis.

Line-side interface

Each 3C-DCI-OTME service card supports two pluggable 200G/100G CFP2 DCO coherent modules, in total eight 200G/100G line-side ports.

Line-side signal and multiplexing structure

200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4
100G: OCh <-> OTU4 <-> ODU4

Client-side signal and mapping method

100GE <-> ODU4

Line-side modulation format

200G:16QAM
100G:DP-QPSK

FEC mode

200G:SD-FEC
100G:SD-FEC

 

3. Electrical Unit - 3C-DCI-OTMD

Technical Feature

3C-DCI-OTMD Description

Size

Two-slot service card, four slots per chassis

Client-side interface

Each 3C-DCI-OTMD service card supports twenty pluggable SFP+ based 10G client ports, in total forty 10G client ports per chassis

Line-side interface

Each 3C-DCI-OTMD service card supports one pluggable 200G/100G CFP2 DCO coherent modules, in total two 200G/100G line-side ports.

Line-side signal and multiplexing structure

200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4
100G: OCh <-> OTU4 <-> ODU4 <-> ODU2/2e

Client-side signal and mapping method

10GE<->ODU2/ODU2e
STM64/OC192 <-> ODU2/ODU2e
OTU2/2e <-> ODU2/2e

Line-side modulation format

200G:16QAM
100G:DP-QPSK

FEC mode

200G: SD-FEC
100G: SD-FEC

 

3C-OTNS8600-DCI4  Main Support Card:

3C-DCI-OTMF Card

Convert 400G CFP2 Slot to 4*100G QSFP28 slots. 

Plug Into 3C-OTNS8600-DCI4 1U Chassis. 1 slots 

3C-DCI-OTME Card

Convert 200G CFP2 Slot to 2*100G QSFP28 slots, each card support 2ch 200G to 2*100G Data

Plug Into 3C-OTNS8600-DCI4 1U Chassis. 1 slots 

3C-DCI-OTMD Card

1, 200G CFP2 to 2* 100G QSFP28 Slots

2, 200G CFP2 to 100G QSFP28 + 10* 10G SFP+ Slots

Plug Into 3C-OTNS8600-DCI4 1U Chassis. 2 slots 

 

Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.

Company

Products

Solutions

News

Contact

Follow Us

Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持

Privacy Policy