|   Home   |   Contact us
MTP Female to LC UPC Duplex OM3 Multimode Fanout Cable
MTP Female to LC UPC Duplex OM3 Multimode Fanout Cable

The single-mode and multimode MPO products are multi fiber connectors used in high -density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to12 times the density of standard connectors,providing significant space and cost savings.

MPO patch cord utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO can be mass terminated in combination of 4, 8, 12 or 24 fibers.

The single-mode and multimode MPO products are multi fiber connectors used in high -density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to12 times the density of standard connectors,providing significant space and cost savings.

MPO patch cord utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions
to ensure fiber alignment when mating. The MPO can be mass terminated in combination of 4, 8, 12 or 24
fibers.
MTP/MPO multi-fiber trunk cables are usually in mini-round cables and ribbon cables, with fanout kits broken down into 2~24 fiber 0. 9mm or 2.0mm tails with connector LC, SC, ST, FC, etc. Cable total length, fanout length, connector type are customized 


0.35dB Ultra Low IL+ Famous brand Connector

Max 0.35dB,a typical lower than 0.15dB on MM Low Loss Ferruler and the MTP/MPO connector assembly is made by famous brand. 


MPO Cable
MPO Trunk cable
0.2 dB Low Insertion Loss LC Connector

The tightly tolerance ceramic ferrules ensuring consistent low loss.



7.5mm Minimum Bend Diameter

Conformed to National Electrical Code  that can be withstanded tight bends and challenged cabling routes with substantially less signal loss


MPO Cable

Connector A MTP Female (pinless) Connector B LC UPC Duplex
Fiber Mode OM3 50/125μm Wavelength 850/1300nm
MTP Connector IL 0.35dB Max(0.15dB Typ.) LC Connector IL ≤0.2dB
MTP Connector RL ≥20dB LC Connector RL ≥20dB
Jacket OD 3.0mm Fan-Out Diameter 2.0mm
Installation Tensile Load 100 N Long-Term Tensile Load 50 N
Storage Temperature -40°C to +85°C Operating Temperature -10°C to +70°C
Cable Jacket Plenum (OFNP) Fiber Count 8 Fibers
· FTTH  
· PON Network
· CATV Links
· Communication Equipment
* Contact Person: 
Company Name: 
* Country: 
Phone Number: 
* E-mail Address: 
Business Type: 
* Subject: 
* Message: