|   Home   |   Contact us
100G QSFP28 Transceivers
100G QSFP28 Transceivers
100G QSFP28 Transceiver is a 100Gb/s Small Form-factor Pluggable (QSFP28) optical module. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s.

 3c-link's 100G QSFP28 Transceivers family includes solution from 100m to 10km transmission ranges, from MMF to SMF and use MTP/MPO or LC-LC connector, which designed to maximize their port density and minimize operating costs, providing a variety of options for data center interconnect solution, telecom networks.

 3c-link's new released 100G QSFP28 Transceivers (QSFP28 SR4, QSFP28 LR4,QSFP28 ER4 QSFP28 IR4PSM) will help to drive next generation of data center and enterprise interconnects


100G QSFP28 Transceiver is a 100Gb/s Small Form-factor Pluggable (QSFP28) optical module. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s.

 3c-link's 100G QSFP28 Transceivers family includes solution from 100m to 10km transmission ranges, from MMF to SMF and use MTP/MPO or LC-LC connector, which designed to maximize their port density and minimize operating costs, providing a variety of options for data center interconnect solution, telecom networks.

 3c-link's new released 100G QSFP28 Transceivers (QSFP28 SR4, QSFP28 LR4,QSFP28 ER4 QSFP28 IR4PSM) will help to drive next generation of data center and enterprise interconnects


100g qsfp28

3C-QSFP28-SR4 is a four-Channel, pluggable, parallel, fiber-optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR and  applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. 


▪ 4 channels full-duplex transceiver modules

▪ Transmission data rate up to 25Gbps per channel

▪ Support 40GE and 56G FDR data rate

▪ 4 channels 850nm VCSEL array

▪ 4 channels PIN photo detector array

▪ Internal CDR circuits on both receiver and transmitter channels

▪ Support CDR bypass

▪ Low power consumption <2.5W

▪ Hot Pluggable QSFP form factor

▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF

▪ Single MPO connector receptacle

▪ Built-in digital diagnostic functions

▪ Operating case temperature 0°C to +70°C

▪ 3.3V power supply voltage

▪ RoHS 6 compliant(lead free)

* Rack to Rack
* Data Center
* Infiniband QDR, DDR and SDR
* 100G Ethernet
* Contact Person: 
Company Name: 
* Country: 
Phone Number: 
* E-mail Address: 
Business Type: 
* Subject: 
* Message: