|   Home   |   Contact us
X2 CWDM/DWDM Optical Transceiver
X2 CWDM/DWDM Optical Transceiver

3C-LINK X2 Transceiver is a highly integrated, serial optical transponder module for high-speed, 10Gbit/s data transmission applications. The module is fully compliant to IEEE 802.3ae standard for Ethernet, making it ideally suited for 10GbE datacom (rack to-rack, client interconnection) applications.

CWDM X2 optical transceiver from 1470nm to 1610nm, each interval is 20nm.

DWDM X2 optical transceiver C-BAND ITU-18 to ITU-61. Total 44Channles.

3C-LINK´s X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s). 3C-LINK manufactures X2 300m, X2 10km, X2 20km, X2 40km, X2 80km optical modules. All modules support Digital Optical Monitoring (DOM) function . 3C-LINK offers the whole series of 10G X2, including: X2 10GBASE-SR 300M MMF OM3; X2 10GBASE-LRM MMF 220M; X2 10GBASE-LR SMF 10-20KM; X2 10GBASE-ER SMF 40KM; X2 10GBASE-ZR SMF 80KM; 40 Channels DWDM X2.

Order Information:

3CC-X2-XX-ER:  10G. CWDM, SC,40km,  X2 Transceiver.( XX=47 means 1470nm, XX=49 menas 1490nm and so on)

3CC-X2-XX-ER:  10G. CWDM, SC,80km,  X2 Transceiver.( XX=47 means 1470nm, XX=49 menas 1490nm and so on)

3CD-X2-XX-ER:  10G. CWDM, SC,40km, 100GHZ, C-Band  X2 Transceiver.( XX=20 means ITU20 CH, , XX=21 means ITU 21 CH and so on)

3CD-X2-XX-ZR:  10G. CWDM, SC,80km,  100GHZ, C-Band  X2 Transceiver.( XX=20 means ITU20 CH, , XX=21 means ITU 21 CH and so on)

  Hot pluggable X2 MSA form factor

Low total power consumption:
RoHS-6 compliant (lead-free)
Temperature range 0°C to 70°C
Transmission distance 300m, 10km, 40km, 80 km

CWDM/DWDM Laser

SC connector, single mode fiber or Multi mode fiber
Full duplex transmission mode
Digital Optics Monitoring (DOM)
Power supply: +5.0 V, +3.3 V
XAUI electrical interface 4 x 3.125 Gb/s Ethernet

Management and control via MDIO 2-wire bus

70-pin connector

Separated signal/chassis ground
Mid Pak module variance for front panel mounting

De-latch mechanism with low extraction force

10GBASE-LR 10G Ethernet
10GBASE-ER 10G Ethernet
10GBASE-ZR 10G Ethernet
10GBASE-SR 10G Ethernet

* Contact Person: 
Company Name: 
* Country: 
Phone Number: 
* E-mail Address: 
Business Type: 
* Subject: 
* Message: